Lightweight Furniture Plywood Panels
Morland produces lightweight furniture boards based on a plywood core. The panels look good, cut and machine cleanly with no break-out, are impact resistant, and do not add excess weight.
For volume supply the “recipe” of the boards can be finessed to suit the application. We have decades of experience in determining the correct board construction and properties combined with the decorative surface.
For smaller volume customers we have a product based on ilomba-faced poplar plywood. Poplar plywood has a density of approximately 440 kg/m3, compared with around 600 kg/m3 for normal plywood, making it perfect as a weight saving option. The board we specify is 15mm nine plys whilst the industry norm is five or seven ply on 15mm board. Every ply improves the screw retention properties of the board. Morland 15mm lightweight furniture ply is therefore both light and strong making it ideal for vehicle fit outs.
The surfaces we offer vary. Our stocked range uses a “hard” continuous pressure laminate surface, sometimes called Vohringer ply. Our bespoke range allows you to choose any high pressure laminate surface you desire in order to create an interior unique to you.
High Pressure Laminate Faced Furniture Board
Morland can offer over two thousand different laminate surfaces applied to poplar plywood to create a lightweight furniture board. Any of these can be bonded to one side or both with a minimum order quantity of three sheets. Our Online Shop makes ranges of furniture board with Formica, Morland and Egger finishes available to order at the touch of a few buttons.
If you have any questions regarding this product please Contact Us
To purchase Morland Lightweight Furniture Plywood directly from us, please visit our Online Shop
Got any Questions?
Please feel free to get in touch and speak to one of our product specialists.
For Interior Use:
- Ideal for vehicle fit-outs where weight is a concern.
- Internal Furniture Components
- Exhibition Walls And Furniture
- Leisure Vehicles
- Welfare Vehicles
- Canal Boats/ Yachts
- NBS Information/ Specification
Morland outline specifications are available in NBS Plus format. These can be downloaded below or they can be produced using the NBS tool to the right.
For NBS Plus specification in downloadable PDF format please see here Morland’s lightweight furniture plywood combines attractive decorative hard laminate surfaces with low density poplar plywood, to give a board that is resilient yet light. Specification Details Core Thickness (mm) 12 13.5 15 18 25 Number Of Ply's 7 7 7 or 9 9 11 Dimensions (mm) 2440x1220 or 2500x1220 Tolerance - Thickness (mm) +/- 0.75 Tolerance - Dimensions (mm) +/- 3.5 Tolerance - Edge Damage (mm) - UNCUT PANELS ONLY 10 Average Density 500KG per/m3 (+/- 10%) (15mm) Manufactured to EN636-1 Ply Glue bond EN314-2 Class 1 (Interior) Formaldehyde Release Class E1 Moisture Content 8-13% Certification
PEFC - Available on request
EUTR Status Compliant - Sourced within the EU CE Marked No Material Safety Data Sheet Available On Request Additional Features Quality Feature Unit Result Standard Resistance to dry heat Rating 4 EN 438-2:2005 Resistance to water Rating 3 EN 438-2:2005 Resistance to staining Rating 4 EN 438-2:2005 Light fastness (Xenon) Grey Scale 4-5 EN 438-2:2005 Resistance to Cigarette Rating 3 EN 438-2:2005
The product information above is from the NBS Plus library of product clauses offered in NBS specification products. It has been created by NBS for Morland. The clause is authored in NBS format and is intended for inclusion in project specifications. The clause can be copied and pasted into your project specification document. Please note that NBS product guidance is not a replacement for the manufacturer's literature and it is recommended that Morland be consulted before specifying.